Hikvision DS-PDPC12PF-EG2-WE Motion Detector With Full Color Camera

Hikvision PIR camera detector (Color version)

Hikvision PIR camera detector is intended for indoor mounting in locations such as living room, kitchen, hallway, bedroom or for use in office buildings.
The PIR camera detector has the model number DS-PDPC12PF-EG2-WE and is a fully secured wireless bi-directional detector with motion detection, built-in high quality camera for video verification, tamper protection, low battery check and connection check. It can operate for up to 6 years from a built-in battery. It ignores animals while recognizing humans from the first step.

Detection Range of the DS-PDPC12PF-EG2-WE
The Hikvision PIR camera detector can monitor an area of 12 meters from the sensor for motion at an angle of 85.9 degrees. If you place the detector in the corner of a room, the entire room will be protected.

The sensor divides the area into 52 zones and sounds an alarm if one or more zones detect movement. This sensitivity is adjustable via the Hik-Connect application on your smartphone. There are 3 modes in total, high sensitivity, normal and animal friendly. The latter should be chosen if cats or dogs are present in the area to be protected. Pets up to 30KG are not detected in this mode.

Range from the Hikvision Hub
The range from the Hub to the Hikvision PIR camera detector DS-PDPC12PF-EG2-WE is 800 meters in open field. The connection is continuously monitored by the Hikvision Cloud. If the wireless signal is intentionally disrupted it will be reported immediately via the Hik-Connect app on your smartphone. The Hikvision wireless signal is called Tri-X, and operates on 2 different frequencies in the 868mhz band and has AES-128 encryption.
Mounting height

The ideal height to mount the PIR camera detector is between 1.80 meters and 2.40 meters high. If you have pets, we recommend a height of at least 2 meters. At this height, a dog of up to 30 kilograms can walk around freely without activating the alarm. If you mount the PIR lower than the recommended height, it will react earlier to pets and the detection distance of 15 meters decreases. Of course, all installation necessities are included.

Logging in and mounting
All Hikvision products are easy to connect. Signing up is done with a QR code on each device. Put the Hik-Connect app in " Enroll" mode and you can start adding products by scanning the QR code in the app.

Mount the detector on a wall without disassembling it. Make sure there are no vases, cabinets or glass objects blocking the angle of view. And you're done. Remember, the ideal location for this PIR camera detector is in the corners of your home. Because of its detection angle, it can secure an entire room at this location.

Settings of the Hikvision PIR camera detector
Besides setting the sensitivity, you can make a number of other adjustments. For example, you can choose to use the detector as a bell function. As soon as someone walks into the room you get a bell on your phone. This doorbell function seems to us more something for shopkeepers or to use with a door contact, so that you are informed when someone comes to your home, for example the children coming from school.

In addition, you can specify when the detector should detect. Only when you switch on the alarm system, or for example permanently if you mount it in an area that needs to be monitored permanently, such as a safe room.

Battery powered
The detector is like all Hikvision products in the AX Pro alarm system, powered by batteries of the type CR123A and therefore completely wireless. There are 3 pieces CR123A batteries in the wireless PIR camera detector. They are therefore easy to place anywhere without having to lay cables. The lifetime of the standard batteries is 6 years with normal use. After this time they are easy to replace for a few euros for new ones. These batteries are always available from stock. How to replace the batteries can be found in the manual of the PIR camera detector DS-PDPC12P-EG2-WE.

The internal PIR is active in temperatures between -10 and +55 degrees Celsius. Outside these values the detection quality may decrease. The dimensions are 120,5mm x 72,2mm x 56,7mm and the weight is 210 grams.

Alternatives

• DS-PDD12P-EG2-WE Wireless Dual-Tech Detector:
  This has an additional RADAR sensor to verify a detection entered via PIR to verify a detection received via PIR. PIR stands for passive infrared, and means that detection takes place based on heat differences in the room. People cause a difference, but air conditioners and fireplaces can also cause this as well. To prevent false alarms from occurring, an As an alternative, you can choose a motion detector with a built-in radar radar module so that perceived heat differences detected heat differences with radar. If the radar image detects a similar movement If the radar detects a similar movement an alarm will be generated.
• DS-PDP15P-EG2-WE Wireless Internal PIR Detector:
  Standard motion detector without built-in camera, with a detection range of 15 meters, and 1600 meters range from the Hub.
• DS-PDC15-EG2-WE Wireless PIR Curtain Detector:
  This has an extra narrow detection angle of 6.3 degrees in order to secure very specific locations to be able to secure. Ideal for example to places in stores with activated doorbell function, so you hear directly if someone walks into the store. But also applicable as security directly along windows or doors. So you can with activated alarm still walk around in the room, and will only sound an alarm at the moment that you come very close to the window or door.
• DS-PDPG12P-EG2-WE Wireless PIR Glass Breach Detector:
  This has additional microphones to check for glass breakage. Because of this will sound an alarm earlier when glass is smashed than with motion detection only.