Hikvision DS-PDP15P-EG2-WE Wireless Motion Detector Black

Hikvision internal PIR detector is intended for indoor mounting in locations such as living room, kitchen, hallway, bedroom or for use in office premises.

The PIR detector has the model number DS-PDP15P-EG2-WE and is a fully secure wireless two-way detector with motion detection, tamper protection, low battery monitoring and connection monitoring. It can operate for up to 5 years from a built-in battery. It ignores animals while recognizing humans from the first step.

Detection range of the DS-PDP15P-EG2-WE.

The Hikvision internal PIR detector can monitor an area of 15 meters from the sensor for motion at an angle of 85.9 degrees. If you place the detector in the corner of a room, the entire area will be secured.

The sensor divides the area into 52 zones and triggers an alarm if 1 or more zones detect motion. This sensitivity is adjustable via the Hik-Connect application on your smartphone. There are a total of 3 modes, high sensitivity, normal and animal friendly. The latter should be chosen if cats or dogs are present in the area to be secured. Pets up to 30KG will not be detected in this mode.

Range from the Hikvision Hub

The range from the Hub to the Hikvision internal PIR detector DS-PDP15P-EG2-WE is 1,600 meters in open field. The connection is continuously monitored by the Hikvision Cloud. If the wireless signal is intentionally disrupted it will be notified immediately via the Hik-Connect app on your smartphone. The Hikvision wireless signal is called Tri-X, and operates on 2 different frequencies in the 868mhz band and has AES-128 encryption.

Mounting height

The ideal height to mount the internal PIR detector is between 1.80 meters and 2.40 meters high. If you have pets, we recommend a height of at least 2 meters. At this height, a dog weighing up to 30 kilograms can roam freely without triggering the alarm. If you mount the PIR lower than the recommended height, it will react more quickly to pets and the detection distance of 15 meters will also be reduced. Of course, all installation supplies are included.

Logging in and installation

All Hikvision products are easy to connect. Signing in is done with a QR code on each device. Put the Hik-Connect app in Enroll mode and you can start adding products by scanning the QR code in the app.

Mount the detector to a wall without disassembling it. Make sure there are no vases, cabinets or glass objects blocking the angle of view. And you're done. Remember, the ideal location of this internal PIR detector is in the corners of your home. Because of its detection angle, it can secure an entire room in this location.
Settings of the Hikvision internal PIR detector

In addition to setting the sensitivity, you can make a number of other adjustments. For example, you can choose to use the detector as a bell function. As soon as someone walks into the room, you will hear a bell on your phone. This doorbell function seems more like something for shopkeepers or to be used with a door contact, so that you are notified when someone comes to your home, for example the children coming out of school.

In addition, you can specify when the detector should detect. Only when you turn on the alarm system, or for example permanently if you mount it in an area that needs to be permanently monitored, such as a safe room.

Battery operation

Like all Hikvision AX Pro alarm system products, the detector is battery-operated (CR123A type) and therefore completely wireless. They can therefore easily be placed anywhere without having to lay cables. The life of the batteries supplied as standard is 5 years under normal use. After this time they can easily be replaced for new ones for a few euros. These batteries are always available from stock. How to replace the batteries can be found in the manual of the internal PIR detector DS-PDP15P-EG2-WE.

The internal PIR works in temperatures between -10 and +55 degrees Celsius. Outside these values, the detection quality may decrease. The dimensions are 65.5mm x 103mm x 48.5mm and the weight is 128 grams.

Alternatives

DS-PDD12P-EG2-WE Wireless Dual-Tech Detector:
This has an additional RADAR sensor to verify a detection received via PIR. PIR stands for passive infrared, and involves detection based on heat differences in space. Humans cause this difference, but so can air conditioners and fireplaces. To avoid false alarms, you can alternatively choose a motion detector with built-in radar module so that detected heat differences are checked with radar. Only if the radar image detects a similar movement will an alarm be generated.

DS-PDPC12P-EG2-WE Wireless PIR Camera Detector:
This has an additional camera to send images directly to your smartphone in case of a burglary report. With this camera detector, you are immediately aware of who or what triggered the alarm, and can take immediate appropriate action.

DS-PDC15-EG2-WE Wireless PIR Curtain Detector:
This has an extra narrow detection angle of 6.3 degrees in order to secure very specific locations. Ideal for example to place in stores with activated doorbell function, so you hear immediately if someone walks into the store. But also applicable as security directly along windows or doors. So you can still walk around the room with activated alarm, and an alarm will sound only when you get very close to the window or door.

DS-PDPG12P-EG2-WE Wireless PIR Glass Break Detector:
This has additional microphones to check for glass clinking. As a result, if glass is smashed, an alarm will sound sooner than motion detection alone.